Heavy oil, tar, and residue oil burner system, relying on a new type of micro-explosion atomizing oil gun, combined with precise ratio control, ensures that the flame of light oil and low-quality heavy residue oil is always in the optimal combustion state.

　　Features:

　　Ø The control system adopts electronic proportional adjustment, and the combustion ratio can be freely adjusted according to the fuel characteristics.

　　Ø Advanced micro-explosion atomizing spray gun is used: Its atomization effect is far superior to conventional mechanical atomizing spray guns and medium atomizing spray guns. The flame temperature is 300℃ higher than that of conventional spray guns, which can reduce energy consumption by 7-15%, and the energy saving effect is significant. Due to its low pressure and large nozzle characteristics, there is no problem of impurity blocking the oil hole, and the operation is stable and reliable with a long service life.

　　Ø The system can be optionally equipped with a high-power fuel heater with PID temperature control to ensure that the incoming oil temperature meets the requirements of good fluidity, solving the safety hazard caused by the residue oil tank temperature being far higher than the flash point and the volatilization loss of light component fuel.

　　Ø The oil flow adjustment ratio is greater than 10:1 (only 4:1 for conventional mechanical atomizing spray guns), which not only effectively improves the temperature control range but also ensures the safety of ignition.

　　Ø Long service life: Because the oil pump and fan operate at very low speeds when the output is small or medium (the oil pump and fan adopt variable frequency control), the temperature rise and mechanical wear of the motor are greatly reduced, thus effectively extending the service life of the oil pump and fan.

　　Ø High reliability: The system monitors various important parameters in real-time, such as oil pressure, oil temperature, atomizing gas pressure, and flame conditions. When a fire extinguishing fault occurs during production, the machine can automatically reignite the residue oil while issuing an alarm, ensuring that production can proceed continuously and stably.

　　Ø High safety: The system has multiple continuous protection functions. The oil cannot be sprayed if the ignition gun is not ignited during startup; once a re-ignition failure occurs during production, the machine will automatically stop spraying oil while issuing an alarm, fundamentally avoiding explosions and combustion accidents.

　　Ø Environmental indicators: Due to the good atomization and complete combustion of heavy residue oil, not only is fuel consumption and the burden on the dust removal system reduced, extending the service life of the filter bags, but also the emission of black smoke and harmful gases is effectively reduced, significantly improving environmental indicators and reducing the noise pollution of the burner.

Heavy oil, tar, and residue oil burner system, relying on a new type of micro-explosion atomizing oil gun, with precise ratio control, ensures that the flame of light oil and inferior heavy residue oil is always in the optimal combustion state.